ЛОМАКС
Formwork systems for cast-in-place construction: wall, column and slab. A steel frame, laminated plywood, ties and locks. Sale and rent from the factory warehouse, a set calculated for your pour.
Panels with plywood and tie assemblies for walls.
Formwork for rectangular and circular columns.
Props, beams and plywood for slabs.
Formwork panels assemble into a frame, fixed with ties and locks — forming the mold for concrete. We'll calculate the kit and layout for your project.
Request a quoteFormwork for your project — we'll calculate the kit and layout.
Get a quote in 1 dayFrame wall formwork for cast-in-place housing.
An economical Cascade wall formwork range.
Radius formwork for curved reinforced-concrete elements: arc walls, tanks, silos and architectural…
Slab formwork on volumetric props: telescopic props, wooden H20 beams and laminated plywood.
Formwork tables — large slab-formwork sections that are repositioned whole by crane, without…
The ST load-bearing tower system for slabs at great height and for stair towers.
Column formwork of square and rectangular section on linear panels.
Column formwork on perforated universal panels: the section is changed by overlapping the panels, without replacing…
Steel circular column formwork of two half-shells.
Universal column formwork that adjusts to the site's specific requirements: sections, heights, nodes…
Complex-shape column formwork: oval and shaped sections, heads, capitals and variable geometry.
Single-sided concreting formwork on counterforts — for walls accessible from one side only (at an…
Tunnel formwork — travelling sections for the cast-in-place lining of tunnels, collectors and underground structures.
Parapet and barrier formwork for bridges and roads.
Cantilever bridge formwork for balanced-cantilever concreting of superstructures.
Stair-flight formwork — a steel mould for cast-in-place and precast flights with steps.
Spring corner for wall formwork: on stripping, the panels spring away from the concrete without hinges or jamming.
Steel formwork for a 33 m span precast bridge beam: a full-profile mould with side panels and ends.
Modular prestressed bridge-beam formwork: the mould is designed for the rebar-tensioning technology.
Universal spring precast-beam formwork: the side panels open elastically, without hinges.
Telescopic prop — an adjustable support for slab and beam formwork.
H20 formwork beam — a wooden I-beam 200 mm tall with a moisture-resistant coating and end protection against delamination.
IPRS — inventory scaffolding — for sale and rent from the LOMAX factory warehouse. Renting is cost-effective for a short cycle; buying pays off from 3–4 reuse cycles. Shipping across Russia and the CIS.
MIK-S — post-type bridge inventory structures: temporary load-bearing supports for span structures and formwork…
Wind screen — a lifting perimeter screen for high-rise construction.
Frame-and-tent enclosure (heated tent) — a quick-assembly building that creates the right microclimate over the pour.
Contour-block formwork — a steel mould for transition (contour) elements of railway bridges.
MGR slab formwork — a mould for small reinforced-concrete frames replacing wooden sleepers.
Prismatic pile formwork — a cassette mould with a built-in stripping element.
New Jersey formwork — a mould for producing road barrier blocks of the characteristic New Jersey profile.
Universal 4-place pile-head mould: it produces four pile heads at once per cycle.
Universal PAG slab mould — a mould for airfield pavement slabs.
Hexbit formwork — a mould for hydraulic-engineering blocks (hexbits) used to reinforce banks, moles and…
Tetrapod formwork — a mould for wave-damping blocks with four conical arms.
ZKPK formwork — a set of moulds for the segments of conical rectangular culvert links.